14-03-2011, 06:52 PM
It was a good day and a lucky one for me with my Edge 540 stripping a gear in the elevator servo and still getting it down safely. Fortunately the servo continued to work over most of it's travel and I only noticed it taxiing back off the strip with the servo's motor spinning loudly and free when the elevator was at full throw.
I won't be buying "Power HD" servo's again!!!! because you can't always be lucky they had a pretty good review as well.????? I also found that they hunted a bit around the center and had a little back lash too. Now it's going to be Hitec 5085MGs instead
I won't be buying "Power HD" servo's again!!!! because you can't always be lucky they had a pretty good review as well.????? I also found that they hunted a bit around the center and had a little back lash too. Now it's going to be Hitec 5085MGs instead
“The knack of flying is learning how to throw your machine at the ground and miss.”
"When once you have tasted flight, you will forever walk the earth with your thoughts turned skyward, for there you have been, and there you will always long to return." ~Leonardo Da Vinci