13-05-2020, 09:57 PM
Hi Eric,
I would remove the trim from the transmitter.
Then power on the radio and plane. This will center the servos.
Remove power and with the servo's centered, get the control surfaces mechanically as flush as possible.
Hope we get to fly again soon !
Cheers,
I would remove the trim from the transmitter.
Then power on the radio and plane. This will center the servos.
Remove power and with the servo's centered, get the control surfaces mechanically as flush as possible.
Hope we get to fly again soon !
Cheers,
If you don't live on the edge, you take up too much space.