19-08-2009, 03:40 PM
Just adding to Kev's description on binding the Rx.
You have to be pressing and holding the trainer switch on when you turn on
the Tx.
Your Rx will start beeping and led will flash until it finds the Tx.
Once led is constant you can turn off both Rx and Tx and remove the bind plug.
Then turn Tx on first and then plane and Rx should be ready.
Paul
You have to be pressing and holding the trainer switch on when you turn on
the Tx.
Your Rx will start beeping and led will flash until it finds the Tx.
Once led is constant you can turn off both Rx and Tx and remove the bind plug.
Then turn Tx on first and then plane and Rx should be ready.
Paul
Jet Teng L39(Breitling)
Scratchbuilt F14 Tomcat(Pukin Dogs)
Vector X
Eflite F86 Sabre(Taz Tiger)
Qantas Airbus A380(Nancy-Bird Walton)
Boeing 737-800
ProEDF F16
Falcon 120(Gas Turbine)
Fly Fly F100 Super Sabre
Pheonix Tiger 6
VQ Models P61 Night Fighter
CY Models FW190