Parramatta Radio Control Aircraft Club
Gazza's Gotta Make Some Room Sale - SOLD - Printable Version

+- Parramatta Radio Control Aircraft Club (https://forum.rcflyingclub.com)
+-- Forum: Forums (https://forum.rcflyingclub.com/forumdisplay.php?fid=7)
+--- Forum: For Sale (https://forum.rcflyingclub.com/forumdisplay.php?fid=6)
+--- Thread: Gazza's Gotta Make Some Room Sale - SOLD (/showthread.php?tid=1050)



Gazza's Gotta Make Some Room Sale - SOLD - gbanger - 24-10-2013

Gazza’s Gotta Make Some Room Sale
I need to get a little ruthless and say goodbye to a few of my aircraft so the new monster will fit in my Hanger.

HK 1400mm Comp, Viper Jet $100 cost $154 SOLD
(new still in box)
   


Alloy DPS 70mm 10 blade EDF $40 cost $72 SOLD
(new still in box) 6S 2200 kv motor producing 2.3 kg thrust at 1900 watts to suit the Viper.
   


HK 1800mm Icon A5 Seaplane $140 cost $206 SOLD
   

This huge seaplane is no longer available from HK and is only 12 months old with less than 20 flights.
HK supply the aircraft fitted with a 6S motor and servos.
I have added flap servos but they are really not necessary as this bird lands very slowly and is a predictable sweet flier. A great aircraft for your first Seaplane.
I am selling it with 2 x 6S 3000mah batteries a Spectrum AR500 reciever and a Turnigy Plush 80 ESC.
I can split it up and remove the ESC and AR500 if necessary.
I love this plane but just don’t fly it enough to keep it.
You will need a big car as the wings are fixed.

700mm Freewing F86 Sabre EDF $10 cost $139 SOLD
   

It is what it is ….. an expensive plane that I do not like at all. You will need a 3S battery and a receiver and really large balls
If you can fly it …. You can have it….
If you crash it you owe me $10

Eflite UMX SBAC 342 $80 cost $179 SOLD
   




Only flow half a dozen times, very nimble little 3D flier, can be flown indoors (basket ball court size that is). Comes BNF with charger and 2 x 2S batteries.

Motors

Dualsky XM5050CA-8
$60 Cost $147 SOLD
   

Kv: 575
Dia: 50mm
Length: 50mm
Shaft: 6mm
Prop hub: 8mm
Weight: 285 g
Current: 45 amps
Burst: 65 amps
Lipo: 3 to 5S
Max Power : 1250W
Prop: 11 x 6 to 15 x 8

This motor has only had about 10 flights in a 1450mm Red Bull Edge 540 and is as new.

Eflite Power 46 $50 Cost $139 SOLD
   

Kv: 670
Dia: 50mm
Length: 50mm
Shaft: 6mm
Prop hub: 8mm
Weight: 290g
Current: 40amps
Burst: 55amps
Lipo: 4 to 5S
Max Power : 990W
Prop: 12 x 8 to 14 x 10

I ran this motor in my early PC 9 but was after more grunt so it has been sitting on the shelf for a long while. It still hauls the mail.

Hacker A50-14S $50 Cost $169 SOLD
   

Kv: 425
Dia: 50mm
Length: 60mm
Shaft: 6mm
Prop hub: 8mm
Weight: 345g
Current: 45amps
Burst: 65amps
Lipo: 5 to 7S
Max Power : 1250W
Prop: 12 x 6 to 16 x 8

She has a few miles on her but she will still haul the mail!
I ran this in my Seb Art Katana and my 2nd PC9 before upgrading again to an even bigger motor, but it runs faultlessly.


RE: Gazza's Gotta Make Some Room Sale - helijeli - 26-10-2013

Gary,
I will take the ViperJet and the 70mm EDF if they're still available.
Thanks.


RE: Gazza's Gotta Make Some Room Sale - gbanger - 26-10-2013

(26-10-2013, 11:13 AM)helijeli Wrote:  Gary,
I will take the ViperJet and the 70mm EDF if they're still available.
Thanks.
They are yours John. I am flying tomorrow if you want me to bring them down to the field.
Gazz



RE: Gazza's Gotta Make Some Room Sale - helijeli - 26-10-2013

Actually busy tomorrow but I'm going to Kennard's in Kellyville later this arvo to return a wallpaper steamer. If you're home, I can Pop by then. I've got your mobile number - I can check with you when I'm in the area.


RE: Gazza's Gotta Make Some Room Sale - secant0give - 26-10-2013

I'll give you 10 for the Sabre Gazz
I'll bring a reciever and some 3s packs tomorrow



RE: Gazza's Gotta Make Some Room Sale - gbanger - 26-10-2013

(26-10-2013, 04:50 PM)secant0give Wrote:  I'll give you 10 for the Sabre Gazz
I'll bring a reciever and some 3s packs tomorrow
No worries Jas, I will throw it in the car.


RE: Gazza's Gotta Make Some Room Sale - Build 'em crash 'em - 08-11-2013

Gaz....
I'll bring another $10 to add to the $50 I gave you for the Dualsky motor.... I'm working Saturday, but will be at the field on Sunday.... Otherwise I'll get it to you when I see you next...
Cheers,
Steve C


RE: Gazza's Gotta Make Some Room Sale - Build 'em crash 'em - 08-11-2013

Actually Gary....
A change of plans.... the motor in my Mustang just threw a magnet and the Hacker would be a better fit for the Mustang with it's 60mm long body.... Can I swap the Dualsky for the Hacker ?
Steve


RE: Gazza's Gotta Make Some Room Sale - gbanger - 08-11-2013

(08-11-2013, 07:05 PM)Build em crash 'em Wrote:  Actually Gary....
A change of plans.... the motor in my Mustang just threw a magnet and the Hacker would be a better fit for the Mustang with it's 60mm long body.... Can I swap the Dualsky for the Hacker ?
Steve
No problem mate, I am flying in the morning weather permitting but if you want to organise a pick up ...give me a call


RE: Gazza's Gotta Make Some Room Sale - peterh - 02-02-2014

Gazz, if the E-flite Power 46 is still on the shelf I will take it.

Thanks, Pete.


RE: Gazza's Gotta Make Some Room Sale - gbanger - 02-02-2014

(02-02-2014, 11:21 AM)peterh Wrote:  Gazz, if the E-flite Power 46 is still on the shelf I will take it.

Thanks, Pete.

Still there mate. Its got your name on it now! Let me know what day you are flying next weekend and I will drop it down to the field for you.
Gazz


RE: Gazza's Gotta Make Some Room Sale - peterh - 02-02-2014

See you Saturday.
Pete.


RE: Gazza's Gotta Make Some Room Sale - ALL SOLD - gbanger - 09-02-2014

ALL SOLD


RE: Gazza's Gotta Make Some Room Sale - SOLD - helijeli - 12-08-2014

Gazza, hope you don't mind me using your thread - but makes it easier than writing a new one.

Am selling the top item above - the Viperjet - same price as before $100.
Still brand new in the box. Will sell the DPS 70mm EDF for $40 to go with it, if wanted but not separately as I would rather keep it for a future project.
I've got too many other projects already and I think this bird may be a little beyond my capabilities for now - my upgraded Stinger is enough speed for me at the moment.
So.... $100 for the Viperjet... or $140 for the Jet & EDF !!!!!!!!!!!!